|
|
A simple query involves one attribute with one operator and one value. NOTE: These filters apply to any reports you later generate during the session.
BEFORE YOU BEGIN: Make sure you clicked the Filters icon on the Condition Map  and the AIMS Filters window is open.
1.To define a simple query, follow the numbered instructions beneath the illustration.
(1).png)
|
(1)-number-1.png)
|
Attribute
|
|
Select the attribute from the first drop-down list. In this example, it is Council District.
IMPORTANT! You must SELECT from the drop-down list; if you simply type the information, the field remains blank. To clear any selection you make, click the X on the right side of the selection.
|
|
(1)-number-2.png)
|
Operator
|
|
Select the operator from the second drop-down list. In this example, it is is not.
IMPORTANT! You must SELECT from the drop-down list; if you simply type the information, the field remains blank. To clear any selection you make, click the X on the right side of the selection.
|
|
(1)-number-3.png)
|
Value
|
|
Select the value from the third drop-down list. In this case, it is 6.
IMPORTANT! You must SELECT from the drop-down list; if you simply type the information, the field remains blank. To clear any selection you make, click the X on the right side of the selection.
|
|
(1)-number-4.png)
|
Execute Query
|
|
Click Apply to execute the simple query. You may need to wait a moment for the filters to be applied.
|
2.After clicking Apply, you should see the results of the simple query as shown in the illustration below. The table beneath the illustration explains the numbered callouts.
.png)
|
-number-1.png)
|
Green Bar
|
|
A green bar appears underneath the Attributes tab, indicating a filter is set.
|
|
-number-2.png)
|
Attribute, Operator, Value
|
|
These are the attribute, operator, and value you selected.
|
|
-number-3.png)
|
Displayed Simple Query
|
|
This is the simple query defined by the attribute, operator, and value. The simple query is displayed in a left to right format.
|
|
-number-4.png)
|
Feature Count
|
|
This is the number of features found that match your query.
NOTE: The feature count includes all features identified by any currently defined layer, attribute, and spatial filters currently defined.
|
|
-number-5.png)
|
Action Buttons
|
|
•Clear Attribute Filters - Removes all attribute filter expressions you have applied from the Attributes tab. See: Clear Attribute Filters.
•Save Attribute and Spatial Filters - Activates the Saved tab and allows you to save the current attribute filter shown on the Attributes tab, along with the current spatial filter (if any), for future use. See: Save Attribute and Spatial Filters.
•Done - Returns you to the Condition Map with the filter applied. (You may also click the X in the upper right corner of the window.)
|
Related topics:
Define an AND / OR Query
Define a Complex Query
|
|
